Three-rolls dough sheeter for biscuit production Features: Designed for feeding and primary sheeting hard biscuit dough.
Material standard: 1. Feeding trough roll diameter: Ø300, the surface is treated with special anti-rust and anti-staining, surface hardness: HRC58-62 2. Diameter of the lower roller: Ø300, the surface is treated with special anti-rust and anti-staining, surface hardness: HRC58-62 3. Working width: 1450mm, electric adjustment of dough thickness 4. Dimensions: 1100X2700X1800 5. The side plate is made of Q235 carbon steel material, and the thickness after processing is 32mm, The surface is plated with hard chrome, the surface hardness is HRC58-62 6. The conveyor frame plate uses Q235 carbon steel material, the thickness after processing is 15mm, The surface is plated with hard chrome, the hardness is HRC58-62 7. The pallet uses 304 stainless steel 8. The roller and the conveyor belt are controlled by independent motors, which is easy to adjust 9. Conveying active roller diameter: Ø160, surface covered with rubber, rubber material is non-toxic and oil-resistant material 10. The conveyor belt uses European imported PU belt with a thickness of 1.3mm, 11. The conveyor belt is pneumatically tensioned and the anti-deflection guide is used to prevent deviation, and the cylinder is made of Korean famous brand YSC; 12. The scraper uses a 2mm thick blade, which has the characteristics of cleaning and not hurting the roll 13. The enclosure is made of 1.5mm304 stainless steel, and the front and rear enclosures use pneumatic support rods 14. The surface of roller, transition knife, etc. are plated with hard chrome 15. Transition mode: roller flat transition 16. The main drive adopts chain drive 17. Adopt no sanitary dead angle structure design, safe and sanitary 18. Install emergency stop switches and other safety protection devices 19. S EW/Siemens for main motor and reducer, frequency conversion speed regulation 20. Roll gap is detected by displacement sensor, accurate digital display, speed and thickness touch screen control 21. The line layout is neat and beautiful, and the wire trough uses aluminum alloy (when equipped with a production line) 22. Control appliances mainly use French brands: S-chneider 23. Bearings use Japanese brand: NSK
){kind=link}