| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Warranty: | Provide |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| MODEL | WORKING WIDTH(MM) | SIZE (L*W*H) | POWER(KW) |
| EZ600 | 580/600/620 | 800*1730*1450 | About 1.9 |
| EZ1000 | 980/1000/1020 | 800*21300*1450 | About 1.9 |
| EZ1200 | 1180/1200/1220 | 800*2330*1450 | About 1.9 |
| EZ1500 | 1480/1500/1520 | 800*2700*1450 | About 1.9 |
Technical parameters:
1. Sheet thickness: 10 ~ 25mm/5 ~ 20mm/0 ~ 15mm, face thickness is electrically adjusted
2. Roll diameter: Ø 300, rust and prevent dust and other special treatment on the surface, the surface hardness: HRC58-62
3. Straight through the active roller conveying: Ø 160, on the surface of plastic bags, rubber material is non-toxic oil resistant material
4. Main motor power: about 1.1kw, stepless frequency control
5. Energy requirements: according to customer demand (generally 380V/50Hz)
Features:
1. This machine is used for semi-fine pressing and fine pressing of dough on toughness biscuit production line
2. The roller gap is detected by displacement sensor, displayed by precise digital display, and controlled by touch screen for speed and thickness
3. The roller and the conveyor belt are controlled by independent motors for convenient adjustment
4. A 2mm thick blade is used for the scraper, which can clean and not hurt the roller
5. Main drive adopts chain drive
6. The conveyor belt is tensioned by pneumatic and deflector guide is used to prevent deviation.
Cylinder with Korean brand YSC;
7. Install emergency stop switch, automatic alarm and other safety protection devices
8. Transition mode: roller flat transition
9. Adopt no sanitary dead corner structure design, safe and sanitary
Material standard:
1. The side plate is made of 45# carbon steel with a thickness of 20mm after processing.
The surface is plated with hard chromium, and the surface hardness is HRC58-62
2. The conveyor plate is made of 304 stainless steel with a thickness of 6mm.
3. Use SUS304 stainless steel for supporting plate and sealing cover
4. The line layout is neat and beautiful, and the groove is made of aluminum alloy (when matching the production line).
5. Motor and reducer are made by German brand: S EW/ Siemens
6. Control appliances mainly use well-known brand: s-chneider
7. The conveyor belt shall be PU belt conforming to food hygiene standards
8. Roller, transition knife and other surfaces are plated with hard chrome
9. Bearings are made of Japanese brand: NSK
){kind=link}