Three-rolls dough sheeter for biscuit production Features: Designed for feeding and primary sheeting hard biscuit dough.
Material standard: 1. Working width: 550mm, sheet thickness: 15-30mm manual adjustment 2. Feeding trough roll diameter: Ø250, the surface is treated with special anti-rust and anti-staining, surface hardness: HRC58-62 3. Diameter of the lower roller: Ø250, the surface is treated with special anti-rust and anti-staining, surface hardness: HRC58-62 4. Conveying active roller diameter: Ø120, the surface is covered with rubber, the rubber material is non-toxic and oil-resistant 5. Main motor power: 0.75KW, stepless variable frequency speed regulation 6. Dimensions: 1780X1000X1800 Power: 1.5KW 7. The roll gap is adjusted by hand wheel, hand wheel with scale data, thickness manual control, speed touch screen control; 8. The roller and the conveyor belt are controlled by independent motors, which is easy to adjust 9. The scraper uses a 2mm thick blade, which has the characteristics of cleaning and not hurting the roll 10. Install emergency stop switch, automatic alarm and other safety protection devices 11. The side board is made of 45# carbon steel, the thickness after processing is 20mm, the surface is plated with hard chrome, and the surface hardness is HRC58-62 12. The conveyor frame plate is bent with 304 stainless steel material, the thickness is 2.0mm, 13. The pallet and cover are made of SUS304 stainless steel 14. The main motor and reducer use German brands: S EW/Siemens 15. The control appliances mainly use well-known brands: Siemens/S-chneider 16. The conveyor belt uses PU belt that meets food hygiene standards 17. The surface of roller, transition knife, etc. are plated with hard chrome 18. Bearings use Japanese brand: NSK
){kind=link}